Simple Guide for Westell 7500 Wireless Router Setup
Wi-Fi Protected Setup is a wireless network security standard that makes the wireless connections faster and easier. Since you do not have a physical WPS button on the Westell 7500 router, you can enable the security standard from your web browser. Enter the Configuration page of the router for Westell 7500 Wireless Router Setup. The IP address of your router will be mentioned in the user documentation or the label of your router. From the Wireless settings of the router, the Push Button method can be enabled.
Where is the WPS Button on my Westell 7500 Router?
Since there is no physical WPS button on the Westell 7500 router, you need to configure the wireless connection to the Gateway by using the Push button method in the wireless setup page.
Visit the configuration page of the Westell 7500 router.
Locate the Wireless tab and click on it.
The Simple Configuration option will be displayed in the top menu. Select the option and wait until the page loads.
Locate the Enable Simple Config button and select it.
Click the Radio button prior to the Use Push Button method option.
At the top of the page is the Begin Simple Config button, click it.
Now turning on the WPS button on your wireless device will connect them automatically.
How to Enable WPS on Westell 7500 Router?
The WPS option is present in the form of a Software button in the Westell 7500 router. You need to enable that from the Configuration page of the router. Learn the procedure to enable the WPS option on the Westell 7500 printer, from the steps below.
Log in to your computer by using the administrator account.
Make sure that you connect your system and Westell 7500 by using an Ethernet cable.
Launch your preferred search engine and wait until the page loads.
The IP address mentioned at the back of the device should be typed in the URL bar of the browser. The address will also be specified in the user manual.
Press the Enter key after mentioning the IP address and wait until the login dialog box appears.
Enter the user name and password as admin, and click OK.
If you have already set the login credentials, use that instead.
The Westell 7500 router’s configuration page opens, here you can modify the settings and save them as per your requirement.
The screen opens with specific tabs in the menu bar at the top of the page.
Locate the Wireless tab from the menu that appears as the third option and select it.
The related options corresponding to the wireless settings displays on the screen.
Look for the Simple Config option and click on it.
The Wireless configuration can be enabled via the Push button method or the Pin method.
Select the Use Push Button Method option to set up a secure wireless access to the gateway automatically.
Now click the Begin Simple Config button at the top of the screen.
The WPS is now enabled on your router.
To connect your devices to the router, make sure that you enable the WPS option.
How do I Setup my Westell 7500 Wireless Router?
If you are attempting to connect a new router, then make sure you remove them from the package carefully.
Remove all the tapes and stickers from the router.
Make sure that you provide the power supply to the router.
Use an Ethernet cable to connect your Westell router and your PC.
Wait until your PC recognizes your router.
Launch your preferred search engine and enter the default IP address in the URL bar of the browser.
The IP address will be on the label that is attached to the back of the router.
You can also find the default address in the user documentation.
A Windows Security dialog box opens asking you to enter the login details.
Specify the username and password as admin in both the fields and click the OK button.
The Configuration page opens where you can modify the settings of the router.
Locate the Wireless tab and select the Basic Setup option.
Edit the SSID if you want and save the changes.
Select the Security tab and modify the wireless security, authentication type, and the passkey.
Choose the Save option to confirm your changes.
Wait until the router completes the configuration process.
How do I Update my Westell Router
Updating the Westell router refers to the updation in the firmware. The steps below will assist you in updating your router.
Download and install the firmware from the manufacturer’s site.
Turn the router in such a way that you face its rear.
You will be able to see four ethernet ports on the device.
Insert an ethernet cable into any one of the ports and its other end should be connected to your PC.
The rear side of the device will contain information regarding your router.
Note your IP address and enter it in the URL bar of your preferred browser on your PC.
Once the IP address is typed, you need to validate it by tapping the Enter key.
Specify the default login details in the dialog box and click OK.
Locate the Maintenance option on the Router Utility menu and select it.
Select the Update Device option from the Maintenance menu.
Locate the Local Update Now option and browse to identify the firmware update file & select them.
Click the Upload File option to update the firmware.
How do I find my Centurylink IP Address?
You can view the Centurylink IP address by following the steps below.
Connect the device to your modem directly.
Launch your preferred search engine and type https://192.168.0.1 in the URL bar of the browser.
Log into the Setup page by specifying the username and password as admin.
If your device is using the default login credentials, then use that instead.
Click the Apply button to validate your login details.
Select the Advanced Setup icon from the menu and choose DHCP settings. The details related to the DHCP settings will be displayed on the screen where you can find the Centurylink IP address.
Make sure that you do not alter the IP address as it will reset any other settings on the modem.
How do I Change my Centurylink Wifi Name?
You can reset your ASUS RT AC66U router in different ways. If you have forgotten your router password or username, resetting the wireless router to the factory default settings is the best choice.
The Wi-Fi name and the passkey is used to connect the devices to your modem. Go through the procedure below to know how to change the Centurylink Wi-Fi name.
Connect the device to your Centurylink modem directly.
Launch your preferred search engine and enter the IP address mentioned at the rear side of the device in the URL bar of the browser.
Specify the login information and enter the Configuration page. The default login details are also mentioned in the label stuck on the device.
Select the Wireless Setup tab.
Move to the left of the screen and select a bandwidth between 2.4 and 5 GHz.
Choose the Wireless Security option from the menu.
Click on the SSID drop-down box to change the name of your Wi-Fi network.
Select Apply to save the settings after you have made the changes.