How To Perform Tp-Link Archer C5400 Router Setup?

Tp-Link Archer C5400 Router Setup

TP-Link Archer C5400 is a Tri-Band Gigabit router that connects all your devices like computer, hard drive, mobile, and tablet through a Wi-Fi network. When compared to other routers, it has the fastest Wi-Fi connection. This router supports both 2.4GHz and 5GHz bands. In this article, we’ve given the simple steps for the TP-Link Archer C5400 router setup>.

Box Content:

  • TP-Link Archer C5400 router.
  • Ethernet Cable.
  • Power Adapter.
  • Getting Started Guide.


  • Open the box and take the power adapter, Ethernet cable, other documents, and the TP-Link router out of the box.
  • Remove the protective tapes around the router.
  • Unpack the antennas from the package.
  • Install the antennas as well.
Setup Tp-Link Archer C5400 Router

Quick Steps For Tp-link Archer C5400 Wireless Router Setup:

Step 1: Basic Router Connection

  • Power OFF the modem and remove the power cable and also remove the backup battery from the modem.
  • Connect an Ethernet cable to the router Internet/WAN port and the modem.
Tp-Link Archer C5400 AC 5400 Router Setup
  • Connect the power cord to the modem and turn ON the modem. Then wait for few seconds.
  • Place the router and the modem near the computer.
  • Now connect the power cord to the TP-LINK Archer router and press the Power button to wake up the router.
  • Wait for few seconds and check if all the lights on the router glow in green.
Tp-Link Archer C5400 Wi-Fi Router Setup

Continue reading the given steps to perform Tp-Link Archer C5400 Router Setup..

Step 2: Quick Setup Via Web GUI

  • Turn ON your computer and click the Wi-Fi icon on the bottom left side of the screen.
  • Locate and select your TP-Link router name in the available Wi-Fi list.
Tp-Link Archer C5400 Tri-Band Router Setup
  • Now click Connect and enter the password in the required field; then click Next.
  • The SSID and password for the router are mentioned on the rear side of the router.
Tp-Link Archer C5400 Tri-Band MU-MIMO Router Setup
  • Once your computer is connected to the Wi-Fi network, open the default web browser.
  • Enter in the address bar and press the Enter key.
  • Now, create a new administrator password for your TP-Link router.
  • Re-enter your administrator password and click Let’s Get Started.
Tp-Link Archer C5400 Wi-Fi Tri-Band MU-MIMO Router Setup
  • On the next page, click the Time Zone drop-down box, select your preferred time zone, and then click Next.
  • Now, click Auto Detect and click Next.
  • Again, click Next to continue the setup.
Tp-Link Archer C5400 AC5400 Wifi Router Setup
  • On the following page, you can customize your 2.4GHz wireless network password. Type the SSID in the Network Name (SSID) text box, and type the password in the Password text box.
  • You can also change the SSID and Password for the 5GHz Wireless network and then click Next.
Tp-Link Archer C5400 Router Setup
  • Now note down your new SSID and password for future use and click Save on the Summary page.
  • Finally, click the Wi-Fi icon on the left-side corner and locate the customized SSID on the available Wi-Fi network.
  • Select the customized SSID, click Connect and enter the personalized password.
  • Now click Next, go to the web browser, and click Save.
  • Skip the login on the TP-Link Cloud webpage.

Now click Finish to complete the TP-Link Archer C5400 router setup successfully. To get more assistance, Call us and get instant solution.

Related Articles