Tenda Fh1206 Router Setup - Brief Guide

Tenda Fh1206 Router Setup

Tenda FH1206 is a Dual-Band wireless router with 5th generation technology and it can transfer data at a speed of 1200Mbps. Using this router, you will get extreme Wi-Fi coverage with less interference. To know more about the Tenda FH1206 router setup, keep reading the quick steps given below.

  • First, connect the router to your modem using the Ethernet cable that came with your router package.
  • Make sure that the Ethernet cable from your modem is plugged into the router’s WAN port.
  • Next, connect a Windows computer to your router using another Ethernet cable. This time, one end of the cable should be plugged into the router’s LAN port and the other end into the computer’s RJ45 (NIC) port.
  • After connecting the cables to your router, turn on your modem.
  • Once the modem is powered on, connect your router to an electrical outlet using the supplied power adapter.
  • Wait until the router’s WAN and SYS lights turn solid.
  • If all the lights are lit, you have completed the hardware connection of the Tenda router setup.
  • Make a right-click on the Network icon in the system tray on your Windows computer and select Open Network and Sharing Center.
Open Network and Sharing Center

Open the properties of your local network adapter and set up TCP/IP protocol to automatically obtain the IP addresses from the DNS servers.

IPV4 Properties

Next, open the default browser and enter your router’s IP address in the URL field. Hit the Enter key to access the router’s web management page.

Default Web Browser

If you are prompted to enter the login credentials, enter the password and click Login.

Tenda Router Quick Setup Wizard
  • After logging in to your router’s web management page, navigate to the Internet Connection settings and choose your Internet connection type for Tenda Fh1206 router setup.
  • If you select PPPoE as your Internet connection type, enter the login credentials given by your ISP.
Tenda Router Setup Web Management Page
  • Secure your Wi-Fi network by changing the wireless security settings.
  • After configuring the necessary settings, click Save and then click on WAN Status to check the connection status.
Tenda Router Setup Status
  • This will complete the router setup.
  • Now after the Tenda FH1206 router setup gets finished, you can connect to the router’s wireless network from your wireless devices and access the Internet.

Related Articles