Tenda Ac15 Router Setup - Complete Guide

Tenda Ac15 Router Setup

Tenda AC15 is a wireless smart Dual-Band router that provides seamless Internet connectivity by routing the traffic to the correct device ports. The Tenda AC15 router setup is quite simple if you follow the quick steps given below.

  • First, check if your DSL modem is working properly. To do so, connect it directly to your computer and check the Internet connection.
  • If you are getting a stable Internet connection, disconnect the cable from the modem and turn it off.
  • Connect your router and the modem using the supplied network cable. It should be plugged into the router’s WAN port.
  • Next, connect your router and the computer using a standard Ethernet cable. The Ethernet cable from the computer should be plugged into the router’s LAN port.
  • Once you have completed the hardware setup, turn on your modem, router, and computer in the correct sequence.
  • Move on to your computer, right-click the Network icon in the system tray, and select Open Network and Sharing Center.
  • Select Change adapter settings at the top-left corner and right-click the Local Area Connection icon.
Change Adapter Settings

Select the Properties option and click on Internet Protocol Version 4 (TCP/IPv4).

Wifi Properties
  • Click on Properties after selecting the network protocol.
  • Enable both the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons.
IPV4 Properties
  • Click OK  Close.
  • Next, open the default browser and go to the Tenda router’s Quick Setup Wizard page.
  • Click Start and wait until your Internet connection type is detected automatically.
Tenda Router Quick Setup Wizard
  • If your Internet connection type is PPPoE, enter the login credentials provided by your ISP in the required fields.
  • Click Next and carry out the on-screen prompts to complete the Tenda AC15 router setup.
  • If your Internet connection type is DHCP/Dynamic IP, choose your desired language and configure the wireless settings such as SSID and network key.
  • Make sure to select the Set up the login password to the same as the Wi-Fi password checkbox and click Next for Tenda router setup.
  • For advanced settings, click the Advanced button and enter the login credentials to access your router’s settings page.
Tenda Router Connected Successfully
  • Check the Internet status after logging in to your router’s settings page.
  • Now, you have successfully completed the Tenda AC15 router setup.

Related Articles