Reset My Linksys Router And Now It Wont Work

Sometimes, you would have reset your Linksys router. But after the reset, your router might refuse to work. If this is the case, try the following reset my Linksys router and now it wont work troubleshooting methods:

reset my linksys router and now it wont work

Try Power Cycling The Router:

Once you have performed the reset, your Linksys router’s Power LED continues to blink for some seconds. But, if it does not stop blinking even after one full minute, you have to power cycle the Linksys router.

  • So, unplug the power cable from the electrical socket. Please wait for 30 seconds. At the end of 30 seconds, plug the power cable back into the electrical socket.
  • Now to solve reset my Linksys router and now it wont work, check if the power adapter is plugged properly into the router. Also, check if the power adapter is correctly connected to the electrical socket. Your Linksys router might not work if any of these two connections is not proper.
  • If the above conditions are satisfied, your Linksys router will start working from now on.
  • If the problem persists, go to the next method.

Check Your Static/Dynamic IP-DHCP:

The Linksys router will not work if you have assigned a static IP to it, but enabled the DHCP server.

If you find that the Linksys router not working after reset problem is not solved even after trying the above method, try utilizing the one described below:

Make Use Of The Default Gateway To Get Connected To The Internet:

Related Articles