Netis Wf2411d Router Setup - Brief Steps

Netis Wf2411d Router Setup

Netis WF2411D is a compatible router with 802.11b/g/n and provides wireless transfer speed of up to 150Mbps. The device supports multi-wireless modes, including AP, WDS, AP+WDS, Repeater, and Client, to quickly expand your wireless network. The router supports the QoS function, which enables you to control bandwidth usage on your system. The WPS component on the router and the Netis WF2411D router setup CD allows for an easy and quick wireless setup.

Follow The Steps To Set Up The Netis WF2411D Router.

  • Unpack the router and find the following elements inside the package: Power adapter, CD ROM, and Ethernet cable.
  • Attach the detachable antennas and place the router in a centralized area to avoid any interference.
  • Attach the Ethernet cable to the router’s LAN port and the other end to your computer.
  • Connect another Ethernet cable from your modem to the WAN port of your router.
  • Connect the power adapter to the power jack and plug the power adapter into the wall outlet for Netis WF2411D router setup.
  • If you like to connect the router wirelessly, then enable the Wi-Fi option and connect it to your computer.
  • After connecting the router and your computer, check the status of the router's LEDs.
  • Make sure that the SYS, WLAN, and LAN LEDs of your router are blinking.
  • Open a web browser on the computer and enter in the address bar for Netis router setup.
  • Log in by using the default Username and Password. Admin is the default username and password.
  • The left menu shows the main options to configure your system. Select WPS Settings.
  • Click on the Add Device button. The screen will be prompt with the following options: Enter the new device's pin and Press the button of the new device in two minutes. You can choose according to your desire to set up your router.

Method 1: Input PIN

  • Enter the PIN of the new device and click Connect.
  • Follow the on-screen instructions and wait for the connection to establish automatically.

Method 2: Press The Push-button

  • Press the WPS button on the router until the WPS LED starts to flash.
  • Push the WPS button for 3 to 5 seconds and a safe connection will be established automatically.

You've completed the Netis WF2411D router setup. Contact us if you're stuck anywhere.

Related Articles