How To Fix Linksys Wrt1900acs Dropping Connection?

Linksys Wrt1900acs Dropping Connection

Linksys WRT1900ACS is a dual-band router and it is a successor to the Linksys WRT1900ACS dropping connection router. Almost all traditional Linksys router models look like a modem. But this one differs and has the look of any other router. Setting up the router is so simple. Once you have done the router’s physical setup, access its web-based setup page from your computer or mobile browser, and complete the setup process. Dropping connection is a common issue encountered by most of the router users.

If you’re also encountering this issue, then carry out the following troubleshooting instructions to fix it.

  • Usually, the slow Wi-Fi connectivity issue occurs when the device is placed far away from the router. So, as soon as you encounter this issue, check the distance between the router and the device. If both the devices are placed far away from each other, move them closer and then check whether the issue is resolved.
  • If the Linksys WRT1900ACS dropping connection issue occurs even when the devices are placed closer, then check whether your router is connected to the correct channel.
  • If you’re using the 2.4 GHz network, then the recommended channels are 1, 6, and 11. Similarly, if your network is 5 GHz, then the channels are 36, 40, 44, and 48. After setting up the network channel correctly, check if the issue is resolved. If not, check if there are any obstructions such as walls, fixtures, furniture, or metal application is blocking your router’s signal. If yes, re-locate your router.

If you encounter this Linksys WRT1900ACS dropping connection issue after updating your router’s firmware, then reset the router to factory defaults.

Procedure to factory reset the Linksys WRT1900ACS router:

Even after waiting for a while, if your modem is not working, restart it. In many instances, a simple restart has resolved such issues on electronic devices. To restart your Arris modem, follow the below instructions.

  • Hardware Reset: Hold down the Reset button of your router. Release the button after 10 seconds.
  • Software Reset: Sign in to your router’s cloud account. Go to the Router Settings section. Select Troubleshooting > Diagnostics > Factory Reset > Reset.

If the Linksys WRT1900ACS dropping connection issue persists, even after performing the above troubleshooting instructions, contact our technical experts.

Related Articles