How To Perform Linksys Wrt100 Router Setup?

Linksys Wrt100 Router Setup

Linksys WRT100 is a RangePlus wireless router that supports six different security modes, namely PSK-Personal, PSK2-Personal, PSK-Enterprise, PSK-2 Enterprise, RADIUS, and WEP. Using this router, you can connect your computer or mobile phone over a wireless or wired connection. It also supports DMZ and SPI firewalls. The default IP address of the Linksys WRT100 router is To sign in to the router’s web access page, you need a password and the default router password is admin.If you’re going to perform the Linksys WRT100 router setup for the first time, then make use of the steps given on this page.

Preparing For The Setup

  • Make sure that you place the Linksys router close to your computer.
  • Check if your modem is connected to the Internet.
  • Make sure that your OS meets the system requirement of the router.
  • Check whether the antennas are mounted properly on the router.

Steps To Perform Linksys Wrt100 Router Setup

Physical Setup

  • Connect your Linksys WRT100 router to your modem using an Ethernet cable.
  • Similarly, using another internet cable, connect your router to your computer.
  • Now, turn on your modem followed by the router.
  • Make sure the LAN LED on your router is blinking.
  • Once the light becomes solid, start configuring the router settings.
Linksys Router Wrt100 Setup

Configuring The Router Settings

  • On your computer, open the default web browser.
  • In the address field, type and tap the Enter button.
  • In the Login wizard, type admin in the Password field and click on Sign in. Now, your Linksys router’s Basic Setup screen will open.
  • On this screen, you can configure your router’s general settings such as Internet setup, network setup, time settings, time zone, etc. 
  • Configure the basic settings as per your needs. 
  • Similarly, set up the Wireless, Security, and other settings as per your needs.
  • Finally, click on the Save Settings button.
  • Now, try to connect your device to the router’s network.
  • If the device connects to the network, then it means the Linksys router WRT100 setup is done correctly.

To get remote assistance in performing the Linksys WRT100 router setup, contact us.

Related Articles