Get the Prominent How to Use Linksys Wifi Extender Guide
The Linksys Wi-Fi Extender allows users to repeat the wireless signal of their router or access point to get Internet access to reach regions through a wireless or wired connection so how to use Linksys wifi extender. Make sure to get the settings of your network router such as network name, password, and wireless channel. The procedure on how to use the Linksys Wi-Fi Extender is listed below.
Restart the Linksys Range Extender by pressing and holding the Reset button on its top for at least five seconds.
Else, do not continue until the LED starts flashing to restore the default settings.
Insert your personal computer to the Ethernet port located on your Linksys extender using an Ethernet cord.
Connect the range extender into an electrical socket. Ensure that the LED lamps are stable.
Start any browser and type the IP address of your wireless router in the search field.
You will be instructed with a window that asks you to enter the username and password.
Don’t enter anything in the username field and type admin in the password box.
Click on the Log In button and choose the Wireless option, and then select the Basic Wireless Settings tab.
Choose the Radio button next to the Manual option and then enter the network name of your router.
Choose the appropriate settings that match the configuration of your access point on the Wireless Security window.
Type your WEP Key or Passphrase and then click the Save Settings option for Linksys Wifi Extender Setup.
Disconnect the electrical cords from your range extender and router wait for about thirty seconds to know how to use Linksys wifi extender.
Connect the router first and do not continue until all the lights are stable, and then plug the Linksys range extender.
Your Linksys range extender should now get synchronized with the router.
How to Setup a Linksys Router as a Wifi Extender
Turn on your computer and connect it to your Linksys router. On the home screen of your computer, and click the Network icon. Your computer will search for the available networks.
A list of active Wi-Fi networks will be displayed on the screen. From the list, choose your Linksys router’s SSID. If prompted, enter the WEP key and click the Connect button to setup linksys router as a wifi extender.
Now that you have connected your computer to the Linksys router’s network open a web browser like Google Chrome or Safari. Navigate to the address bar and enter 192.168.1.1 while following how to use Linksys wifi extender.
Press the Enter key and wait for the router’s configuration page to appear.
If the page does not appear, check if you have entered the IP Address in the URL bar which is available at the top.
Once you login to the router’s configuration page, you will be prompted to enter the username and password. If you do not remember the username and password, leave the Username field blank and enter admin in the Password field.
Click the Sign In button and the Linksys router’s configuration page will appear on the screen. Under the Router Settings tab, click the Connectivity menu.
Select the Internet Settings tab and click the Edit button. In the Connection Type field, choose Wireless Repeater and enter the SSID of your Linksys router in the Network Name field.
Choose the Network band & Security Mode and click the OK button. In the Password field, enter the Linksys router’s password and click OK.
No go back to the Connectivity tab and change the settings like SSID and password for your extender. Click OK and select the Apply button for Linksys Wifi Extender Setup.
How to use Linksys AC1900 as Wifi Extender
The guidelines specified here will help you set up your Linksys A1900 router as a Wi-Fi repeater.
Before initiating the setup process, you have to collect the wireless settings of the router or access point.
Turn on your computer and open a browser such as Explorer or Edge.
Find the IP address of the router at the back side or from the document provided while purchasing the router.
In the browser’s search bar, type the IP address and press the Enter button.
Log in to the Web utility page of the Linksys router.
Make sure to enter the correct username and password to log in.
Select the Connectivity tab and then choose the Internet Settings option.
Click the Edit option present near the Type Of Internet Connection option..
Next, tap the Wireless Repeater option, and in the succeeding window, you have to enter the details that are required.
Set the Connection Type as Wireless Repeater. Give a name to the network and choose the network band. Select a Security mode and tap the OK button to save the settings.
Click the Yes option in the Warning screen and the Router is in Repeater Mode message will be displayed on your screen.
How to use Wifi Extender Linksys RE1000
Follow the instructions given below to know how to use your RE1000 Linksys Wi-Fi Extender.
Prior to the router setup process, check if you have an Internet connection, wireless network, and the password to connect to the network.
You have to place the installation CD in the CD drive. Select the Set Up your Linksys Range Extender option in the AutoPlay screen.
If the window does not pop-up, then go to the local drive of the computer and run the setup file while following how to use Linksys wifi extender.
Agree to the End-User License Agreement in the next window and click the Continue option.
The wireless connection will be detected in the next step. Associate your repeater to the power supply using a power cord.
Choose a wireless network in the next window and enter the correct password.
Follow the instructions on the computer’s screen to place the repeater in a different location and click the Next button.
The Linksys repeater is now set up and you can start using it.
Linksys Extender Setup RE3000W
The steps below shows you the Linksys Wifi Extender Setup procedure to learn how to use a Linksys WiFi extender RE3000W.
If you are doing the Linksys Extender setup RE3000W for the first time, unwrap it from the box and place it in a location within the Wi-Fi range.
Ensure that you provide power supply to your extender and check the light on top of the device.
Turn on your PC/mobile and connect it to the Wi-Fi network that has the default name of the Linksys extender.
Use the 192.168.1.1 IP address to launch the Configuration page for Linksys Extender setup RE3000W.
Select the Start button on the first page and the I agree button on the License Agreement page.
Choose your network's SSID from the list of networks available and specify the pass-phrase to know how to use Linksys wifi extender.
A confirmation message stating Your extender is now configured appears on the screen.
How do I access Linksys WiFi Extender?
The Wi-Fi extender acts as a repeater that repeats the signal from the router to the dead Wi-Fi zone.
Insert the Linksys extender into a power outlet.
After the connection, the indicator light on the device remains stable.
Connect the ethernet cable between your extender and system.
Mention the IP address of the router setup in the URL bar of the browser and access the web page.
The Internet Protocol(IP) address of the router is 192.168.1.1. Provide the necessary details of the router in the Authentication page.
The credentials of the router are username and password. Leave the password space blank.
Select the Login option to access the web page of the router.
Change the password of the router if required for Linksys Wifi Extender Setup.
If you are unable to log in using the credentials, troubleshoot the router and then establish the connection.
You can find the network name of the router in the Quick Launch bar.
Start the setup process by powering on your extender. Now, connect your Linksys Wi-Fi extender to any one of the devices such as a laptop or computer. Use an Ethernet cable or Wi-Fi to connect the Linksys extender and the device.
Now, open a browser on your computer, enter into the official page of Linksys. You are prompted to enter the username and password to log into the page. Once you enter the credentials in the respective field, the Linksys Wi-Fi range extender setup wizard is launched while following how to connect a linksys wifi extender.
Tap the Wireless option in the setup page. Select Basic Wireless Settings and choose the Manual setup option. Enter the Network name & security key and click the Save Settings options. Now the Linksys Wi-Fi extender is connected successfully and follow how to use Linksys wifi extender to handle it.