HOW TO SETUP A NETGEAR WN3000RP
The Netgear WN3000RP Wi-Fi extender is used for increasing the range of your wireless network. You must connect the Netgear WN3000RP Wi-Fi range extender to an existing wireless network. You can either use the WPS mode or web browser setup guide to connect the extender to your router. The easy steps on
how to setup a Netgear WN3000RP Wi-Fi range extender are provided right here on this web page.
NETGEAR WN3000RP SETUP
Before proceeding with the guidelines for how to setup a Netgear WN3000RP mentioned below, make sure your Netgear WN3000RP computer and router are in the same room.
On a wireless compatible computer, search for a wireless network and connect to Netgear_ext.
Launch a browser on it and go to the website, ‘www.mywifiext.net.’
Choose the preferred language and click on the Continue button.
Click on the wireless network that has to be extended, and then click Continue.
Key in your network security key and then click the Continue button.
You can click the checkbox to apply the same settings to the extender as the existing network if required. Then, click Continue.
Now, click OK and view the wireless extender network details on the screen for netgear wn3000rp setup.
You can use any device to connect to the extended wireless router setup network.
CONFIGURE THE NETGEAR WN3000RP RANGE EXTENDER USING A WIRELESS COMPUTER
Turn on your computer and check for the NETGEAR_EXT wireless network on it.
Click the network icon and select the Scan option.
Select the NETGEAR_EXT wireless network in the displayed list.
Now, open a browser on the computer which is connected to the NETGEAR_EXT wireless network.
Navigate to the official page of the Netgear.
Select a language in the drop-down menu on the Smart Wizard window.
Click the Continue button. Wait for the Smart Wizard to check for the existing wireless network.
Once the search process is complete, a list of available existing wireless networks within the Smart Wizard range will be displayed.
Choose your existing wireless network from the displayed list and click the Continue button.
Click the Apply Security tab at the left-hand side of the screen for netgear wn3000rp setup.
Type the passphrase of your wireless network in the Security Encryption section while following how to setup a Netgear WN3000RP extender.
Click the Continue button. Select the Configure Extender tab and click the checkbox to save this network as the existing network for your Netgear extender.
Click the Continue button. Wait for the Smart Wizard application to connect to the existing wireless network.
It takes approximately two minutes for this process to complete.
Click the OK button. Now your device is configured to the wireless extender network.
CONNECTING FIOS ROUTER TO NETGEAR WN3000RP RANGE EXTENDER
The Netgear router can be set up as an AP with a FiOS router. Refer to the following how to setup a Netgear WN3000RP steps to make this set up easy.
Go to the computer connected to the FiOS router and launch a browser.
Provide the IP address of the router in the address bar and click the search icon for netgear wn3000rp setup.
Log into the web setup page of the FiOS router using the appropriate credentials. Click the Wireless Settings tab on the main page.
Click the Basic Security Settings option. On the page that opens, select Off against the Wireless option.
Now, click the Apply option displayed at the bottom of the page.
Wait while the changes are being saved and applied.
The next is to set the Netgear router in AP mode. To do so, log into the Netgear web setup page by providing the necessary credentials.
Give a click on the Advanced tab and then click Advanced in the side menu bar.
Choose the Wireless Settings option. A list of wireless options will be displayed. Find the AP Mode option and check the box against it.
Mark the box next to the Get IP Address Dynamically and the Get DNS Server Address Dynamically options.
Now, connect the Netgear router to the FiOS router using an Ethernet cable.
Note: The cable should be plugged into the WAN port of the Netgear router and the LAN port of the FiOS router.
HOW DO I RESET MY NETGEAR EXTENDER WN3000RP?
To reset your Netgear extender WN300RP, follow the step-by-step how do i reset my netgear extender wn3000rp instructions below.
The factory reset process will clear all settings.
Get a Paper clip to perform the reset operation.
Plug in the Netgear extender setup into the electrical outlet.
Switch on the Netgear extender and wait for it to become idle.
Now, get the paper clip and insert it into the Factory reset/Reset hole.
You can find the factory reset hole at the back of the netgear wn3000rp setup extender.
Insert & hold the paper clip until the extender status LED light flashes amber.
As soon as the LED light flashes amber, remove the paper clip from the extender.
Leave the extender to complete the reset process which has been done using how do i reset my netgear extender wn3000rp.
Once the extender is completely reset, turn it on and set the settings as per how to setup a Netgear WN3000RP extender your need.
NETGEAR WN3000RP SETUP WIZARD DOWNLOAD
There is an application called Smart Wizard Utility for setting up the extender. The application automatically displays while you attempt to launch a web browser after installing the extender.
Open the web setup page of the extender using its IP address.
Select the Setup Wizard option from the Menu. You should select the same wizard that opens during the installation for netgear wn3000rp setup wizard download.
Now, select your network SSID from the list of networks displayed. Otherwise, you can manually add your network’s SSID.
After providing your network’s security key, click Continue.
The extender will connect to your wireless network and the extender’s network name changes to your wireless network name with the EXT as a prefix.
Once the connection is set up between the extender and your network, your computer will be disconnected from the extender’s network.
Join the extender’s network to the software using which you manage your wireless connections.
Now, check if the PC to extender LED is lit on the extender’s panel and then click Continue on the Extender wizard screen using how to setup a Netgear WN3000RP extender guide.