How To Set Up Second Router As Access Point?

How To Set Up Second Router As Access Point?

Are you encountering a low network coverage issue and looking to improve your wireless network’s coverage & speed? Then you have reached the right page to perform it.You can extend your wireless network coverage using an additional router or access point. By connecting the additional or new router to an existing one will help you to improve your network coverage easily. But, you can’t afford a new router, or if you’re looking for an inexpensive way to improve your network coverage, then you can use an old or used router as a second access point. Scroll down this page to know how to set up second router as access point. First, you need to gather your main router’s wireless settings. After gathering them, you have to configure your second router as a repeater using the main router’s settings. Finally, connect both the routers (main and second) together using an Ethernet cable or the Cat-5 cable.

Step-by-step Instructions To Set Up The Second Router As An Access Point

Step 1: Gather Your Main Router’s Ip Address And Subnet Mask

  • First, make sure that your main router is connected to the computer over a wired or wireless connection.
  • Now, get your main router’s default IP address using the Terminal or CMD window.
  • For Windows: In the CMD window, type ipconfig/all
  • For Mac: Type the route-n get default command in the Terminal window.
  • Note the default IP address of your main router displayed on the screen.
  • Now, open your browser and type the default IP address in the search field.
  • Tap Enter.
  • If prompted, type the router’s default credentials to access its web GUI.
  • Go to the Wireless Settings tab.
  • Note down your router’s SSID, Wi-Fi security key, and Wi-Fi mode.
How To Set Up The Second Router As Access Point?

Step 2: On Following How To Set Up Second Router As Access Point, Configure Your Second Router

  • If you’re using an old or used router, then make sure to reset it.
  • Now, connect your second router to the computer using an Ethernet cable.
  • Get the router’s default IP address as discussed in step 1.
  • Access the second router’s web GUI.
  • Go to the Advanced routing section of your second router.
  • Select the Router mode instead of Gateway.
  • If the NAT option and the DHCP server are enabled on your second router, then disable them.
How To Configure The Second Router As Access Point?
  • Make sure to set the Subnet mask of the second router the same as the main router.
  • You can set the desired SSID for your second router.
  • Finally, save the settings.
Configuring The Second Router As Wi-Fi Access Point

Step 3: Connect Both The Router Together

  • First, make sure that your modem is connected to the WAN port of the main router.
  • Get an Ethernet cable or the CAT-5 cable, and using it, connect your main router to the second router. (This time, connect the cable to the LAN port of both the routers).
  • Now, your second router is ready to be used as an access point.
  • Try to connect your computer or mobile phone to the second router to check whether the setup has been completed correctly.

To get remote assistance in how to set up second router as access point, contact us.

Related Articles