Reset Netgear R6300 Router
The Netgear R3600 router needs to be reset when it faces any problem and stops working normally. Sometimes, a simple reset process might fix many issues such as overheating, connection problems, Internet issues, and more. The reset process is very simple and can be carried out in less than a minute. The instructions to reset your Netgear router successfully is given below.
Router Reset Netgear R6300 Router
How To Reset Netgear r6300 Router
To reset your Netgear R6300 router, perform the step-by-step instructions as given below.
Switch on your Netgear r3600 router and wait for a few seconds for the router to complete initializing.
Locate the Reset button on your Netgear router.
Usually, the Reset button is located at the back of the router.
The reset button is built in small size to avoid accidental reset process.
Get a paper clip or small needle to press the reset button.
Insert the needle into the reset button.
It takes approximately five to ten seconds.
Release the reset button. Wait for the router to restart.
Open a web browser, log into router site using default username and password.
Once your router reset is done, you can use your router as per your need.
How to Configure and Reset Netgear R6300 Router
To configure the bridge mode on your router, type the default IP address of the Netgear R6300 access point in the search bar of any internet browser.
Navigate to the Advanced tab and then click on the Advanced Setup option.
Choose the Wireless Settings button, select the Use other operating mode option, and then click on Enable Bridge Mode.
Choose the Bridge mode wireless settings option and then configure the needed settings for your Netgear R6300 router.
To select the frequency of your wireless network, select the drop-down list box and then choose 2.4GHz or 5GHz.
Provide the SSID or wireless network name of your access point.
Choose the needed security mode and then enter the network key.
Select the Apply button and then choose Apply again on the Wireless Settings dialog box.
To reset the network settings of your Netgear R6300 router, perform the instructions below.
Go to the rear of your Netgear r6300 router and then long press the Reset button.
The process might take at least five to ten seconds.
The button has been designed small to overcome accidental reset processes.
You must use a sharp material such as a pen or paper clip for accessing the Reset button.
After ten minutes, release the Reset button and wait until your Netgear r6300 wireless access point reboots completely.
Sign into the Configuration web page using the default username and password to finish the reset process.
Netgear R6300V2 Factory Reset
The first step of the procedure is to check if the Power light is lit.
Find the Reset button available at the back of the router.
Search for a paper-clip and straighten it. You can also use any object similar to a paperclip.
Use it to press the Reset button and hold it for a few seconds.
Release the button and wait till the reset process is complete.
Once the reset procedure is over, you have to use your default username and password to log in to your web interface.
Configure the router again to start using it.
Netgear R6300 Default Password
The default password of the Netgear R3600 router is common for almost all the routers.
It is available at the back of the router.
A label is stuck at the rear side of the router. The credentials required for accessing the web utility page are printed on it.
The username is Admin for most routers and the password is password.
Find the IP Address of the Netgear router from the back side of the router.
You can also find it in the documentation that came along with your router at the time of purchase.
If you want to change the password, you can log into the web management page using the credentials and change the password.
How Do I Access My Netgear r6300 Router?
To access your Netgear R3600 router, perform the step-by-step instructions given below.
First, log into the Netgear R3600 router’s official page.
Open a web browser, type the IP address of the router, and click the Enter button.
Type the Username & Password in the given filed and click the OK button.
Now the Netgear home screen opens.
Select the option as per your need to access and perform the operation.
How do I access my Netgear router if I forgot the password?
It is suggested to turn On the password reset feature.
Once the reset option is enabled, you can use it for changing the password if you have forgotten it.
In the search bar of any of your web browser, enter www.routerlogin.net and the Login dialog box displays on your computer screen.
Select the Cancel button. If the password recovery feature is turned On,
How Do I Reset My Netgear Router To Factory Settings?
To factory reset your Netgear R6300 router settings, perform the step-by-step instructions as given below.
Get a pen or paper clip to press the reset button.
Now, switch on your Netgear router to begin the reset process.
Locate the reset button on your r3600 router.
The reset button is designed small to avoid accidental reset process.
Now, insert the pen or paper clip into the reset hole.
Press and hold the clip until the test light starts to blink.
Once the test light blinks, remove the clip from the router’s reset button.
Now, sign into the router account on your computer.
Use the default username and password of the router for signing In.
Click the OK button to confirm the action.
Disconnect the power cable from the router.
Press & hold the paper clip into the reset button again.
Reconnect the power cable into the router.
Now the Netgear router is reset successfully.
What happens if I factory reset my Netgear router?
The factory reset process is carried out to fix the issues that occur in the Netgear wireless access point.
You can carry out the reset process from your wireless access point or Web Interface page.
A factory reset process restores all the settings of the Netgear wireless access point to its default values.
All the customizations get deleted, and you cannot retrieve them.
The username and the password will also reset to the default ones.
You can get the username and the password from the documentation that was provided with your Netgear router.
If you want to modify the default credentials, do the same from the Web Interface page.
You can carry out the configuration of the Netgear router from the web-based setup page.