How To Configure D Link Router In Bridge Mode?

Configure D Link Router In Bridge Mode

The bridge mode is a configuration that gets rid of the NAT feature on your router and lets the router to function as a DHCP server without an IP address conflict. With the bridge mode, you can connect multiple routers and help in extending the Wi-Fi range. To know how to configure D Link router in Bridge mode, refer to the steps below.

Benefits To Turn D-Link Router As A bridge

  • It takes advantage of the Wi-Fi speed on devices that do not need a wireless connection.
  • Use Wi-Fi for applications like streaming videos and gaming.
  • You can connect to multiple devices like NAS, Smart TV, Blue-ray player, gaming consoles.
  • You can avoid using multiple adapters for each device.

Things To Be Check

  • Primary wireless router
  • Active internet connection
  • Ethernet cables
  • The D-Link router

Set Up Your D-Link Router In Bridge Mode

  • Take an Ethernet cable and connect it between your computer and one of the LAN ports of the router.
  • Now connect the D-Link router to a power source and turn it on.
  • Open the default browser on your computer, enter the router’s default IP address, and press the Enter button.
  • Enter the default login credentials and click the OK button.
  • The D-Link router page will open.
  • Locate and click the Wireless tab and then select the Wireless Settings option on the page.
  • You will see a set of options and a couple of checkboxes. Click the box to enable the option WDS.
  • Enter the SSID name on the D-Link router page.
  • The AP list will now open.
  • Select the SSID name you have entered on the list and then click the Connect button located on the right side of the option.
  • In the next step, the SSID will be filled automatically.
  • Enter the Wireless security settings and then click the Save button.
  • Go back to the Wireless Security page, then click the DHCP option.
  • Select the DHCP settings, click the Disable radio button, and then click the Save button.
  • Click the Network option on the left pane, click the LAN option, and make changes to the IP address.
  • Click the Save button.
  • Navigate to the System Tools option and click the Reboot button.

Now you have successfully configure D link router in bridge mode.

Related Articles