To configure the Frontier router, use the default credentials to log into the Frontier router setup web page.
Select the Setup tab and then click the Setup Wizard button on the screen.
Select the ‘Launch Internet Connection Setup Wizard’ button when the new dialog window appears on the screen.
Do not change the password of your Frontier router and select the Next button.
Also, choose the correct timezone in the specified field.
Do the steps enable upnp on frontier router below to set the Static IP address on your PC.
Open the command box and then enter the command ‘ipconfig/all’ in the command window.
Check and note the IP address, Subnet Mask, Default Gateway, and name servers.
Now, enter the command ‘exit’ to close the command window.
Now, go to Start Control Panel Network Connections and then choose the network which you want to connect.
Select the General Tab and then click the Properties button on the bottom of the screen to display the Properties window.
Checkmark the box next to the Internet Protocol (TCP/IP) option in the ‘This connection uses the following items’ section.
Now, click the Properties button to open the next window on the screen.
Select ‘Obtain an IP address automatically’ and then note down the IP address, Subnet mask, and Default gateway. Now, select ‘Use the following IP address’ to enter the details like IP address, Subnet mask, and Default gateway in the specified field.
Click ‘Obtain DNS server address automatically’ and note down the Preferred DNS server and Alternate DNS server. Click ‘Use the following DNS server addresses’ and then enter the preferred and Alternate DNS servers in the respective fields to enable upnp on frontier router.
Hit the OK button on the bottom of the screen to set the Static IP address on your computer.
After setting up the Static IP address, open the web browser like Google Chrome, Firefox, Internet Explorer, or Edge.
Enter the IP address of the Frontier router in the address bar and then log into your account using the default username and password.
The default username and password for Frontier router is ‘admin’. Ensure that you enter the correct credentials to log into the account.
Select the Advanced Link tab on the main page of the Frontier router to view the Port Forwarding section.
Checkmark the box next to the Enable option to create a port forward. Mention the range in the Port Start and Port End boxes.
Choose the protocol in the Traffic Type section. After you complete the settings, click the Save Settings button on the top of the screen to save the changes on Frontier router setup.
How to Reset Frontier Router
Proceed with the following steps to reset Frontier router.
You can reset Frontier router in two ways. The first one is a power reset which eliminates most of issues.
To perform power reset, disconnect the power cord from the Frontier router.
Ensure that you do not unplug the coaxial cable.
After a few minutes, you need to reconnect the power cord to the Frontier Wireless Router Setup.
The other method to reset Frontier router is to find the Power button and then press it for approximately 15 seconds.
Port Forwarding Frontier Router
Here are the guidelines to set up port forwarding Frontier router. Make sure you have the Frontier router’s username and password on hand before proceeding with the following steps.
Connect the Frontier router setup and computer via an Ethernet cable to port forwarding Frontier router.
Navigate to the Frontier router’s EWS page on your computer by typing its IP address (It can be found on the Frontier router’s label and in its user manual) in your web browser’s address bar. Press Enter.
The Frontier router EWS authorization page loads. Type the Frontier router’s username and address in the respective fields and click OK to port forwarding Frontier router.
Click the Firewall Settings tab on the top of the screen. Click Yes on the warning screen.
Choose the Port Forwarding option on the left-hand side of the screen. Scroll down to find the Add option. Click it. Now, the Add Port Forwarding Rule page loads.
Choose the required Protocol from the drop-down list. Click the Apply button on the pop-up window. Now, the newly set port forwarding protocol appears at the bottom of the list.
Frontier Router Not Connecting To Internet
If the Frontier router not connecting to Internet, you can follow these guidelines to troubleshoot the issues and resolve them.
The first step is to restart the Frontier router. Press the Power button on your Frontier router to turn it off. Unplug its cable from the power port and wall power outlet to solve Frontier router not connecting to Internet.
Wait for at least thirty seconds before plugging the Frontier router’s power cable into the wall outlet and power port. Check whether the issue is resolved. If it is not, perform a factory reset on the Frontier router.
Take a pen, an uncoiled paper clip, or any object with a pointed edge and insert it into the slot marked as Reset. Push it in to press the Reset button. Keep pressing it for at least ten seconds.Release the button. Now the Frontier router will begin the reset. You will notice the LEDs flashing while the reset is in progress. After a few minutes, the router’s Power LED glows. Now, check whether the issue has been resolved.
Check whether the Frontier router setup is connected to a working wall power outlet. Disconnect it from the power strip, if used, and connect it directly to the wall power outlet.