How To Do D-link Exo Ac1750 Router Setup?

D-link Exo Ac1750 Router Setup

The D-LINK EXO AC1750 router comes with a dual-band (2.4 GHz and 5 GHz). So, you can rely on this router for the maximum possible speed for all your devices. You can get broader coverage throughout your home as it is equipped with the latest antenna technology. The Gigabit Ethernet Ports on your router can give you the best online experience for online gaming, HD streaming, and file transfers. If you want to know the procedure for D-Link EXO AC1750 router setup, follow the instructions mentioned below.

Hardware Setup

  • Unplug the cables from your computer and modem and start connecting the cables between the modem, the computer, and the router. You need two Ethernet cables to proceed further.
  • Take out the Ethernet cable given along with your router and plug one end of the cable into your modem and the other end into the yellow port labeled INTERNET on your router.
  • Turn on your modem and wait for a minute.
  • Connect the given power adapter to the router and an electrical socket and press the power button.
  • Wait till the orange light of your router turns white.
  • If you want to connect to your router wirelessly from a PC, take out the given Wi-Fi Configuration Card and connect to the Wi-Fi network printed on the card. At your router’s bottom, you can find the Wi-Fi network’s name and password.
  • If you want to configure a wired Ethernet connection, plug one end of the Ethernet cable into the router port labeled 1 and plug the other end into the Ethernet port on your computer.
  • Now, the hardware setup of your router is finished.

Configuring D-link Exo Ac1750 Router Setup

  • Open a browser on your computer and enter the IP address of your router.
  • Press Enter to access the setup wizard.
  • The Setup Wizard will guide you with step-by-step instructions for your router’s configuration.
  • Wait until your router detects your Internet connection. Then enter the credentials of your Internet service provider.
  • If your D-link router does not detect a valid Internet connection, you can select it manually.
  • If you select your Internet connection type as PPPoE, enter your PPPoE username and password and press Next.
  • If you select Static as your Internet connection type, enter the IP and DNS settings given by your Internet service provider. Then press Next.
  • Create a strong Wi-Fi password. Make a note of the password. Whenever you try to use your router’s Wi-Fi, you will be prompted to type the password every time. Then, press Next to continue.
  • Now, you will be directed to look at the summary of your settings. Finalize the settings according to your wish.

You have successfully finished the D-Link EXO AC1750 router setup.

Related Articles