D-link Dir-615 Wireless N300 Router Setup

D-link Dir-615 Wireless N300 Router Setup

D-Link DIR-615 is a single-band router that provides a reliable and seamless wireless connection. It delivers high-speed Internet access to computers, gaming consoles, and media players. For detailed instructions about the D-Link DIR-615 Wireless N300 router setup, go through the steps given below.

Features Supported By This Router.

  • Wi-Fi Protected Setup (WPS)
  • Fast Ethernet ports
  • wireless encryption using WPA or WPA2
  • IEEE 802.11n/g technology

Steps To Setup D-link Dir-615 Wireless N300 Router

Hardware Setup:

  • To begin with, unpack your router and place it close to your modem.
  • Remove all the cables connected to your modem and ensure that it is turned off.
  • Connect your modem and router using a standard Ethernet cable. This cable should be plugged into your router’s WAN port.
  • Next, connect your router and computer using the supplied network cable. This cable should be connected to your router’s LAN port.
  • Now, turn on your modem and then the router.
  • Check if the link lights on the router are lit.
  • You have now completed the hardware setup and are ready to begin the D-Link DIR-615 Wireless N300 router setup on your computer.
D-link Dir-615 N300 Router Setup

Software Setup:

  • On your computer, close all the running apps and open the default browser.
  • Type your router’s IP address in the URL field and hit the Enter key to access the web-based configuration utility.
D-link Dir-615 Singleband Wireless N300 Router Setup
  • Enter the default router password to log in to the web-based configuration utility.
  • The default username is admin.
  • Let the password field blank and click the Log In button.
D-link Router Dir-615 Wireless N300 Setup
  • Next, click the D-link Router Setup tab at the top and select Internet from the left-side panel.
  • Click the Internet Connection Setup Wizard tab to configure your router settings using the setup wizard.
  • If you wish to configure the router settings manually, click the Manual Internet Connection Setup button.
Setup D-link Dir-615 Singleband Wireless N300 Router
  • In the D-link dir-615 wireless n300 router setup wizard, click Next and create a new password to secure your Wi-Fi network.
  • Input your password again in the Verify Password field and click Next.
Setup D-link Router Dir-615 Wireless N300
  • Choose your time zone and click Next.
  • Select your Internet connection type from the following options.
  • DHCP Connection (Dynamic IP Address)
  • Username/Password Connection (PPPoE)
  • Username/Password Connection (PPTP)
  • Username/Password Connection (L2TP)
  • Static IP Address Connection
  • After choosing your Internet connection type, click Next.
Setup D-link Dir-615 N300 Wireless Router
  • Based on your Internet connection type, you will be prompted to enter the credentials.
  • Once you have completed the Internet setup for your D-Link DIR-615 Wireless N300 router, click Connect to save the configured settings.
  • Wait at least 2 minutes to allow your router to reconnect.
  • The next time you log in, enter the newly created password.

To get instant assistance on D-link Dir-615 Wireless N300 Router Setup, Call our tech experts and get fine solution

Related Articles