How To Do Centurylink Dsl Router Setup?

Centurylink Dsl router setup

The CenturyLink modem has a built-in router that helps in broadcasting your wireless network. And the Centurylink Dsl router setup, refer to the step-by-step instructions mentioned below.

Step 1 - DSL filter:

Establish a connection between a DSL filter and a phone jack using a cable.

Step 2 - Connecting the AC power adapter:

  • Place the CenturyLink modem in a highly ventilated location.
  • Take an AC power adapter and connect its one end to the rear side of the CenturyLink modem.
  • The other end of the AC power adapter needs to be connected to the power source for Centurylink Dsl router setup.
  • If the modem has a Power button, hold it to turn on the modem.
  • If the modem does not have the Power button, it will turn on automatically once you are done with the AC power adapter connection.
  • Wait until the Power LED on the modem gets lit up.

Step 3 - Phone cord:

  • Search for the DSL or Line port of the CenturyLink modem. It will be green in color.
  • Use a telephone cord to establish a connection between the DSL port of the modem and the phone jack that help to do Centurylink Dsl router setup.

Step 4 - Ethernet cable connection:

  • One end of an Ethernet cable must be connected to the Ethernet (yellow color) port of the CenturyLink modem.
  • The other end of the Ethernet cable should be plugged into the Ethernet port of your computer.
  • Check if all the hardware connections are correct.
  • All the LEDs will stay lit in green except the Internet LED. The Internet LED must be blinking after the Centurylink Dsl router setup.

Step 5 - Service activation:

  • Open the Google Chrome, Microsoft Edge, or any other web browser on your computer that is connected to the CenturyLink modem.
  • Now, the Welcome page of the CenturyLink modem will appear automatically.
  • Select the Next option and perform the instructions displayed on the screen to activate the service.
  • The activation process might take up to 15 minutes.

Step 6 - Wireless setup:

  • Go to the web browser, type the CenturyLink router’s IP address in the address bar, and press the Enter key on the computer’s keyboard for Centurylink Dsl router setup.
  • Provide the default username and password to access the router’s management console.
  • Once done, change the login credential for security purposes.
  • Check if the CenturyLink router is running the latest firmware. If not, update it to the most recent version.
  • Now, navigate to the Wireless Settings section and select the Wi-Fi Settings or Wireless option.
  • Make sure to turn on the wireless network.
  • Choose the Auto option from the Channel menu and leave the Mode field as it is.
  • Change the network name (SSID) of your wireless network. Specify the encryption type and create a Wi-Fi password.
  • The password must be a combination of letters, numbers, and symbols.
  • Save your settings and exit the management console.
  • Disconnect the Ethernet cable between the CenturyLink router and the computer.
  • Use the SSID and password to establish a wireless network connection and then finally complete the Centurylink Dsl router setup.

Related Articles