Can't Connect To Belkin Router

If you can't connect to Belkin router, follow the below-mentioned troubleshooting steps.

Unable To Connect Belkin Router

  • First, check the hardware connections on the Belkin router.
  • Power cycle your Belkin router by unplugging the power cable and reconnecting it after thirty seconds.
  • Check if the Internet connection from the ISP is standard.
  • If you are connecting the Belkin router to a Windows computer, use a standard Ethernet cable.
  • After establishing the connection between them, open the default browser on your Windows and type the Belkin router's IP address in the URL.
  • On the Belkin router's web page, enter the username and password, and click Login.
  • The default username and password are available on the label located at the backside of the Belkin router setup.
  • If you aren't able to use the wireless network, check the firmware version of your Belkin router.
  • If you are using an outdated firmware version, download and install the latest firmware version from the official Belkin site.
  • If the can't connect to Belkin router problem persists, click the Start menu and type "cmd" in the search panel.
  • Click the Command Prompt application and select the Run as Administrator option.
  • Type the command "netsh int ip reset c:\resetlog.txt" in the Command Prompt window and press the Enter key.
  • Restart the Windows computer if prompted on the Command Prompt window.
  • Check the Wi-Fi Security Settings as well as Wireless Broadcast Settings for your Belkin router to solve can't connect to Belkin router.
  • On the Windows desktop, open the Control Panel and select Network and Internet --> Network & Sharing Center.
  • Click the name of the connection near Connections.
  • Click the Properties button at the bottom-left corner of the window to solve unable to connect Belkin router.
  • Choose Internet Protocol Version 4(TCP/IPv4) and click the Properties button.
cant connect to belkin router
  • Make sure to select the "Use the following DNS server addresses" radio button.
  • Enter for the Preferred DNS server and for the Alternate DNS server.
  • Click the OK button and close the Control Panel window.
  • Now, check if you could access the Belkin router from your computer.
  • If the can't connect to Belkin router problem remains unsolved, contact our technical experts by clicking the Call button available on this screen.

Related Articles