How To Setup Belkin Router Port Forwarding?

Belkin Router Port Forwarding

Belkin routers have a basic firewall setting configuration that helps in protecting the home network from the access of unwarranted internet activities. The activated firewall settings thus block the incoming and outgoing ports. In certain scenarios, some of the online games and applications will perform better if access to the additional ports is allowed. To perform this action, you need to forward the port and the process is termed as port forwarding. The basic functionality of port forwarding is to permit external devices to pass on through the router’s firewall for services. We will let you know how to enable port forwarding on your BELKIN router.

Before proceeding to the belkin router port forwarding configuration settings, make sure whether the following requirements are addressed.

  • Lookup for the IP address of the system or the device to be port forwarded.
  • Check the port numbers that are to be used and hence ensure whether they belong to TCP or UDP protocol.
  • The belkin router port forwarding is well connected to the system using an Ethernet cable.

Moreover, in this example, the below ports will be forwarded for the XBOX gaming console:

  • TCP 80
  • UDP 88
  • UDP 3074
  • TCP 3074
  • UDP 53
  • TCP 53
  • Step 1: Open a web browser of your choice and enter the IP address of your Belkin router ( in the address bar. Tap the ENTER button and it will load the router’s web-based setup page.
  • Step 2: Click Login on to the upper right corner of the setup page and then enter your credentials. Then click SUBMIT to move on further.
  • Step3: Under the Firewall section (left sidebar), click on the virtual services option and enable the following instructions that lie under.Xbox1 Field: Enter the value 80 under the Inbound port and set the protocol type to TCP.

Now, enter the Xbox console’s IP address under the Private IP address field, and then key in the Private port information in the assigned fields. Similarly, enter the details for the other ports to be forwarded Note: It is important to assign a static IP address to your device to enable the port forwarding.

  • Step 4: Click on the Apply Changes button/tab to save the customized reset settings.
  • Step 5: Test whether your ports are open and see that the Belkin router port forwarding.

For further technical clarifications and assistance, kindly reach out to us for an immediate and instant resolution.

Related Articles