Asus Wl-600g Router Setup - Complete Guide

Asus Wl-600g Router Setup

The Asus WL-600G router comes with an ADSL modem & firewall built-in that allows you to connect your device to a fast and secure network. This router is compatible with 802.11b devices. The below section explains how to perform the Asus WL-600G router setup for the first time. 

Inside The Package, You Can Find The Components Mentioned Below.

  • Asus WL-600G wireless ADSL2/2+ Home gateway
  • AC power adapter
  • Category 5 Ethernet cable
  • Quick start guide
  • Telephone line cord
  • Support CD
  • ASDL splitter

Now, let’s see how to perform the Asus router setup over a wired and wireless connection.

Step-by-step Instructions To Perform The Asus Wl-600g Router Setup

Step 1: Hardware setup

Based on your connection type, the procedure for the hardware setup will vary. 

For ASDL Connection

  • Get the ASDL splitter provided along with the package and connect it to the telephone outlet.
  • Using the telephone cord, connect your Asus WL-600G router to the ASDL splitter.
  • Connect the telephone to the splitter using another telephone cable.
  • Make sure that all the cables are connected securely.
  • Now, turn on all the devices and skip to step 2.

For Wired Connection

  • Connect your Asus WL-600G router to the computer using an Ethernet cable.
  • Similarly, connect the router to the ADSL splitter using the telephone cable.
  • Using another telephone cable, connect your telephone to the splitter.
  • Connect the splitter and router to the power outlets and turn them on.
  • Make sure that the Power, Internet, and other necessary LEDs are blinking on your router’s control panel.

For Wireless Connection

  • Place your desktop or laptop within the range of the Asus WL-600G router.
  • Now, check if your computer supports wireless.
  • If not, install a wireless adapter such as IEEE 802.11 b/g/ on your computer.
  • Turn on the router and your computer.
  • Make sure that the Power and Internet LEDs on your router’s control panel are blinking.

Step 2: Configuring the router settings

You can configure the router settings in two different ways. 

  • Using EZSetup utility
  • Using the router’s web configuration interface

The below section explains the Asus WL-600G router setup using the EZSetup utility and the router’s web configuration interface.

Method 1: Using EZSetup Utility

The EZSetup utility is provided along with the router’s support CD. Insert the CD into your computer’s disc drive and run the installation. Usually, if the auto-run process is enabled on your computer, the installation will be initiated automatically. If not, locate and double-click on the SETUP.EXE file to install the utility. Once the utility is installed, follow the below instructions to configure the router settings such as internet connection, wireless LAN, etc., using the EZSetup utility.

  • Go to the Programs window on your computer.
  • Open the Asus Utility file.
  • Select WL-600G wireless router > EZSetup Wizard. Click on the Next button in the EZSetup wizard's Welcome screen.
  • Choose EZSetup Wizard and follow the on-screen instructions to complete the Asus WL-600G router setup

Method 2: Using The Router’s Web Configuration Interface

  • Go to the Asus WL-600G router’s web configuration interface page.
  • If prompted, use the default credentials for signing in.
  • Based on your connection type, the corresponding Quick Setup window will open.
  • Configure the router settings by following the on-screen instructions.
  • Once the Asus router setup is completed, try to connect your device to the router’s network.

To get remote assistance in performing the Asus WL-600G router setup, click on the Call button provided on this page.

Related Articles