Check whether your computer is connected to access ATT router, Open an internet browser and type 192.168.1.254 to login to the web-based control panel. Ensure that you are linked to the network. Enter the password if required. Usually, the password will be on your gateway unit. Follow the instructions on your user manual. Log into router configuration by typing the username and password provided in your manual. Set your Service Identification by typing it in the box. This will be your wireless network. Usually, the default SSID is the name of the router manufacturer. Set your router’s security protocol to WPA.
The Wi-Fi name and password is on the side of your U-verse router.
The name of the Wi-Fi access point is printed next to the Wi-Fi Network Name. It usually begins with either ATT or 2 Wire.
The password is directly below the network name, next to Wi-Fi Password.
Connect your computer to the Wi-Fi network.
If you are using Mac select the Click the Airport icon. in the menu bar. Now choose the Wi-Fi Network Name from the side of your router. If a window prompts, enter the Wi-Fi password.
If you are using Windows, click the Wi-Fi icon at the bottom right corner of the screen. Now select the Wi-Fi Network Name from the list of networks. Enter the Wi-Fi password when prompted.
If you can’t connect to Wi-Fi, then use an Ethernet cable from your computer’s networking port to the LAN on the ATT router. The machine should then automatically connect to the network while following How to Access ATT Router.
Launch a web browser, type 192.168.1.254 into the address bar and Press Enter. Enter the system password if prompted. Most U-verse routers don’t have a router password. If the password is prompted, leave the field blank.
ATT Uverse How to Disable Devices From Accessing Router
Connect your computer to the ATT router’s network.
Open Google Chrome on your computer and type 192.168.1.254 in the address field.
Log into the router’s setup page by entering the credentials.
If you did not change the password, enter the default one which was given by the service provider.
Click the Wireless tab and choose Disabled from the drop-down box.
After you select it, click the Save button by doing How to Access ATT Uverse Router.
Once you click the Save button, a successful Configuration page will appear.
Now the Wi-Fi signals from the ATT router get disabled.
You cannot access the ATT router unless you enable it.
You can go back to the Wireless tab to enable the Wireless network using How to Access ATT Router guide.
ATT Uverse Router How to Limit Wifi Access
On your Windows computer, open the Run command by using the key combo Ctrl + R.
Type the command word IP configuration and click the Enter button.
Scroll the screen. Look for Local area configuration.
Note down the number that appears under the Default Gateway tab.
Now you have to access the router. So, open a browser on your computer by doing How to Access ATT Uverse Router.
Enter the number you have noted in the search field and click the Enter button.
Enter the username and password and click the OK button.
Now, the router’s home screen appears.
Click the Advanced option.
Select the Time Zones option under the Configuration menu.
After changing the IP address, make sure to adjust your PC’s network settings.
After setting the time, click the Apply button, and then tap the Save config option. Click Apply again.
Now, select the Time scheduling option under the Configuration menu.
Set the time limit and click the Save button using How to Access ATT Router guide.
Now the Wi-Fi access gets restricted.
How to Access ATT 7550 Routers
On your computer, search for browser, and open it.
Otherwise, click the Start or Window icon at the taskbar and select a browser.
Double-click the Browser icon to open it using How to Access ATT 7550 Routers guide.
Type the IP address of your router in the browser’s search bar and click the Enter button.
Note the IP address displayed on the computer screen.
Now, enter your router name and password in the text field displayed.
Click the Next button.
Tap the Advanced tab if prompted.
Now, the ATT settings page shows up on the computer screen.
Change the settings as per your need.
To secure your Wireless router connection, log into the Router Configuration Page.
Type the Username & Password in the entry field.
Enter the SSID code of your wireless network in the field given.
Set your Wireless network’s security protocol and click the Save button.
Now, you can access your ATT 7550 router easily.
How to Access ATT Uverse Router 5268
To access the settings of the ATT U-verse router, search for the browser on your system. Double-click on it to access the browser.
Type the IP address of the router to access the web-based control panel on your system. The password is available in the gateway unit. Type the characters in its tab.
Choose the Wireless option located at the home page of the router.
The Settings tab is available on top of the tab.
Select the LAN option under the tab. Check if the Wireless Interface of the router is enabled.
A PIN for connecting the network pops-up while pressing the Use PIN option.
Select the Save option to apply the Settings.
A configuration message indicating a successful connection displays on the screen.
The Wireless page displays the network ID, Authentication type, Network Key and Status.
In some cases, it is required to modify the firewall settings for gaming and other applications.
These are some changes that are carried out on your Settings screen while doing How to Access ATT Router.